Fire helmet use cleaning and maintenance and the note |
Link: fireman turnout gear 2013-12-19 |
When on fire helmet shell is clean, use soap and water and soft cloth to clean. Don't recommend the use of grinding sand mold cleaning sponge surface screen and safety goggles, recommend the use of fire helmet supplier sea on offer professional detergent and soft cloth to clean, ensure the cleaning of the surface screen without damage. When clean cap lining, the cap can be lined with about 30 degrees Celsius temperature with mild detergent to clean warm water. As far as possible using tap water rinse cap inside the shell. Note: do not use hydrocarbon cleaning products or solvent cleaning and fire helmet surface screen and goggles.After cleaning the fireman helmet you need for each part, especially all the link of a thorough examination. Mainly check the correct part fixed way fixed parts, secondly whether there is a visible wear parts, helmet whether any damage. Ensure the normal regulation of the fire helmet. If there are parts damaged parts, it is only through the helmets are accredited suppliers to buy parts for installation, in order to ensure that the helmet in conformity with the specifications. Recommendations on a regular basis to qualified institutions to test whether a helmet to use standard.If fire helmet clean up is completed, you can put on the helmet specific protection bag, or seal, such as closet, cabinets, etc. Storage place as far as possible away from humidity, illumination and exhaust gas. Avoid falling when stored in or knock against, because it may lead to damage of mask, helmet weaken shock absorption system function or damage to the surface protection coating.fireman helmets use notice:The helmet is not suitable for long time use.Safety goggles when have scratches or damage should be replaced.When carrying a helmet, mask and safety goggles should be stored in the helmet.If sensitive physique, when material in contact with the skin, can cause allergic reactions.After each use of the fire helmet, to make a thorough clean.
Fire avoid the fire service |
Link: fireman turnout gear 2013-12-17 |
Fire method to avoid the fire wearing clothing :Avoid the fire service because of slightly heavier than other clothes should be someone to wear .1 , avoid the fire service sub- coat, trousers , first put on the pants , and then put on fire boots, zip , pants set in the boots , fastened leg opening .2 , back good cylinders, wear a respirator , wear a T-shirt after the zipper pull , and then zip , button press is good press , after wearing gloves fastened cuffs .3 , wearing fire hoods , first wearing a fire helmets , and then underarm straps fixed.4 , body check before entering the fire operation. When detachable gloves off first , then off his shirt , remove the respirator and gas cylinders, fire boots off , and finally take off pants.Fire Precautions to avoid the fire service :1 Fire avoid the fire service is a fireman fire zone or short short crossing areas into flames to save, rescue precious materials , combustible gas valve closed and other dangerous places to wear protective clothing . When firefighters during fire operations , if the situation in a long time , we must use water guns, water cannons protection, no matter how good the material for a long time to avoid the fire will burn in flames .2 , Fire avoid the fire service must be certified before use to check whether the place is intact damaged .3 , Fire avoid the fire service is prohibited in the chemical and radiological harm places.4 , Fire avoid the fire service must wear air respirators and communications equipment , to ensure that personnel using normal breathing at high temperature , as well as contact with the commanding officers.5 , garment after using surface soot , smoke stains may be cotton wipe dirt with a soft brush dipped in other neutral detergent scrub and rinse with water , non- firefighting water immersion or avoid taking fire thump, rinse after suspension in the ventilation , natural drying , ready for use.6 , Fire avoid the fire service should be stored in dry and ventilated , no chemical pollution site, and regular checks to prevent mildew.
The operation of the fire inspection ark of knowledge |
Link: fireman turnout gear 2013-12-10 |
Talk about "fire inspection ark", from the literal meaning, just as its name implies is to use in the field of fire products, but what is it specific refer to? Sure this problem you are in doubt, let's talk about it now! We live to analyze fire inspection cabinet now start working principle, fire inspection cabinet has a primary loop checking and fire fighting equipment without checking in two parts, can complete low speed automatic inspection of main control circuits and water pump. Fire with a primary loop checking and inspection equipment fire equipment without checking in two parts, can complete low speed automatic inspection of main control circuits and water pump. Fire control system without fire command and fire control equipment system switch in the automatic state, can run for fire pump automatic inspection. Automatic inspection cycle to hundreds of hours you can choose any one hour, periodic clock automatically start checking program and have the function of manual inspection. Fire intelligent digital output inspection equipment inspection instruction one by one of the primary loop for inspection, inspection return signal derived from the electrical components of the main auxiliary contact. Feedback signal time value is not greater than 2 s. After the completion of the main circuit inspection, inspection controller will happen the next inspection instruction to no pressure inspection device, the device will, in turn, after receiving inspection instructions for fire pump low-speed without inspection. Inspection motor speed is low, the system does not produce water pressure. Inspection, fire pump driving power is small, about one percent of the rated power is about pump motor, so energy saving is obvious. The entire inspection process such as equipment had been ordered fire intelligent inspection controller will immediately stop the inspection instructions, instantaneous start the fire pump for fire control tasks. Only at the next polling period and no fire event occurs, began to run a new inspection process. Inspection, if the water pump failure will give fault alarm information. When input output overvoltage, undervoltage, lack of phase, over current, short circuit controller can send alarm message to fire control center. This automatic inspection to ensure the result of the fire pump won't produce corrosion, rust phenomenon, make the fire water supply equipment "find one thousand days, fighting for the" become a reality. The device also has the main standby pump automatically swaps, after the main pump failure, the standby pump automatic investment; Main standby power supply automatically for each, when the main power failure, the standby power supply automatically inputs, etc; Digital intelligent fire inspection control equipment will be provided to all of the above function data remote transmission, image monitoring, fault alarm, information printing, etc.
The use of fire fighting equipment to defend the status |
Link: Firefighter Bunker Gear 2012-12-04 |
A fire brigade use of fire fighting equipment and the maintenance of the status quo1, the sense of lack of respect for the fire fighting equipment and maintenance , Some grassroots squadron lack of use and maintenance of the equipment necessary for the Prevention of Cruelty awareness, not in accordance with normal operating procedures, resulting in incorrect operation using state equipment long, broken equipment vulnerability. Analyze the main reason is the lack of
Equipment care awareness, lack of the necessary special education, did not to establish equipment care awareness in the minds of the majority of officers and soldiers. Second, the lack of maintenance awareness also contributed equipment to shorten the life of one of the main reasons, each use of equipment must be carried out after they have finished the necessary peacekeeping
Care and maintenance, such as scrub, add oil, maintenance, etc., and the only way to ensure that fire fighting equipment can have a longer life, give full play to the performance of the equipment, to maximize conservation funding.Equipment use skills of high-tech content generally have poor The construction of a high-quality duty training, fire fighting and rescue teams, in addition to the human factor, the role of science and technology and equipment should also not be overlooked. It turns out, has a positive role in promoting high-tech equipment to enhance the combat effectiveness of troops, the content of these high-tech equipment of official
Soldiers play an important role in the daily duty training, fire fighting and rescue work, was generally welcomed by the majority of the rank and file. However, due to the lack of professional maintenance staff to the grassroots units, or after use, maintenance training before veterans or mobilize not
Do a good job in the transfer of work, resulting in long-term improper use of these high-tech equipment, and some units because maintenance is not in place, these high-tech equipment in advance retired, did not fully play its due performance.3, all data is lost resulting in maintenance is not in place New fire fighting equipment to buy back is equipped with a manual, detailing the operation of Use, maintenance technical considerations and some basic parameters, such information can ensure that the user to the correct operation of the use and maintenance of equipment, capable of give full play to its most powerful and longest useful life. Some units are responsible for fewer cadres do not attach importance to the custody of these data, resulting in data loss, coupled with operating personnel to mobilize or veterans, the transfer of training work successor is not in place, correct operation of the use and maintenance personnel Therefore, it can be difficult to ensure that the fire-fighting equipment to the correct use and maintenance.
Fireman clothing characteristics |
Link: Firefighting Clothing 2012-12-04 |
firefighting clothing protective equipment firefighters basic fire-fighting tasks.
New Firefighting Clothing using a four-layer structure, a dedicated protective equipment is designed for use in extinguishing, does not apply to other rescue operations. Clothing autumn, winter points throughout the year are a set of clothing around the world are so. The so-called "cotton liner" is the insulating layer, the protecting fire body against heat burns the most important of the protective layer, and the split design is to facilitate cleaning, must be worn in the fire-fighting operations.
Hot regions in the autumn, from the following aspects to solve the heatstroke problems.
Adapt to new equipment, changing dress habits, and actively explore a new type of portable equipment. Old-fashioned Firefighting Clothing, generally the waist tie seat belt requirements in the fire and rescue this regard to the safety of air operations requirements, another important reason is the portable equipment. Strict new firefighting protective clothing protection, internal heat mainly rely on the hem of the garment of natural ventilation, bar seat belt just blocked this important channel. Foreign rarely use a special fire-fighting clothing bar outer belt, It seems that we should change the way we dress habits timely.
Professional equipment used exclusively the continuous wearing firefighting protective clothing appropriate to reduce the time. Professional Firefighting Clothing system will follow this path of fire protective clothing. Dedicated fire fighting protective equipment fire fighting protective clothing, not wearing general rescue, rescue special clothing standards are being developed, must wear into the fire, the insulation layer can be removed . Outdoor fire-fighting and rescue tasks at the same time, can be considered to reduce continuous working time, work for 45 minutes or so, it should be rotation the rest to reduce the chance of heat stroke.
3, some additional measures to prevent heatstroke. The southern autumn extinguishing, simple protective measures can effectively prevent heat stroke. Underwear cotton fabric chosen to wear comfortable, absorbent ability, do not wear synthetic underwear. Drink some light brine and mung bean soup recipe is also Jieshu.
4, advanced firefighting protective clothing. Reduce garment weight, volume, reduce the thickness of the insulation layer is the dream of every firefighters. Firefighting protective clothing in some developed areas, they used exactly the same as the structure of our clothing but excellent insulation layers, light weight, good ventilation, good protective effect can also be achieved, but the price is very expensive.
5, to take coercive measures to cool. In some special occasions, need fire to work long hours in the hot case, then how to do it. There are way more popular cooling vest. The principle is very simple, water and other the majority thermal material as the cooling medium skin wear, the lower torso surface temperature, so as to achieve the purpose of the extension of working hours, the domestic forces using.
Fire Fire is the close protection of each of the front-line fire officers and men of God must be properly dressed use to effectively protect our safety in fire fighting and rescue.
Of fire equipment and rescue equipment existing |
Link: Firefighter Bunker Gear 2012-12-05 |
fire fighting equipment is a general term for all kinds of fire extinguishers and fire fighting equipment, equipment instruments used for fire and rescue scene. The status of the fire fighting equipment should be two analysis, the first from the point of view of the fire fighting forces troops fire equipment fire equipment as the main force of China's fire and rescue, fire fighting equipment is an important factor to determine the fire combat effectiveness of troops. Our overall fire-fighting equipment in the world the backward level, some conventional equipment is still in the event of default. From the aspects of production, production enterprises to meet the market, whether firefighters demand for production purposes.From the point of view of the fire brigade:A logistical equipment and fire forces the coordinated development and military constructionAn important part of the logistical equipment and the fire brigade is a strong guarantee to promote healthy and progressive development of army building, the fire brigade logistical equipment is an important part of the work of the Fire Force Logistics objectively reflect to some extent with the military construction The level of development is an important symbol to measure the level of military construction. New developments, improve the coordinated development of the fire brigade logistical equipment construction and military construction, has a very important significance. Therefore, how to realize the coordinated development of the fire brigade logistical equipment construction and army building, Fire Force Logistics has become an important issue. Vigorously strengthen logistical equipment and fire fighting forces, to promote comprehensive military construction to achieve the coordinated development of the fire brigade logistical equipment construction and military construction, is an important duty of the military authorities and the levels of heads, this is related to the stability and combat effectiveness of the troops, fire forces building in the next period of important content. Therefore, it is necessary to raise awareness, strengthen leadership, efforts to achieve coordinated development of fire logistical equipment construction and military construction.Imbalance, fire fighting forces around the development of equipment and equipmentFirst, some grass-roots cadres and not strong sense of responsibility, outdated ideas, lack of knowledge on the status of its equipment building.Performance in specific equipment construction no goals, no plan of the national standards mastered unclear fine, do not know how much gap between ourselves. The lack of initiative, thought of complacency and the status quo is still prominent, innovative ideas. These problems are restricting the the forward main problem of the construction of fire-fighting equipment.Fire fighting forces and equipment supply relationship specialization determines the development process of the equipment building. Our fire fighting forces and equipment supply and other services, different kinds of police officers, the local supply system, so, how to deal with the relationship between the local government and social units, is a complex issue before us. Moreover, we are also facing the small local sources of funding, equipment and equipment purchase volume is increasing year by year, and fire fighting equipment are increasingly faced with the social development and the progress of science and technology, diversified and complicated. Lanzhou City belonging to the economically underdeveloped areas, local financial allocations and a serious shortage of available funds is very limited. But the expansion of the mandate of the fire fighting forces, especially the rescue mission, a substantial increase in the Secret Service need to be equipped with a large number of complete range of equipment and personal protective equipment, limited funding is increasingly unable to meet their needs, the more the gap between fire sources of funding and support requirements widening, lack of equipment and equipment will seriously affect our duty combat readiness task completion, uncoordinated sources of funding and equipment needs to focus on the problem we need to solve.Equipment for the progress of the construction and development of grassroots units uncoordinated.At present, the construction of fire-fighting equipment by the local economic development and institutional constraints, institutional factors, regional disparities, which to us the grassroots force is equipped with the progress of construction caused a big gap. Between the grassroots squadron equipment construction and development level is uneven, some units of equipment and equipment obsolescence is still fairly serious imbalance in the development of grassroots units and equipment construction affect the smooth completion of the fire fighting and rescue tasks. Currently, the building of grassroots units and equipment all-round development to be a prominent issue we need to address.Fourth, technical personnel forces with state-of-the-art equipment and equipment uncoordinated development.
New Firefighting Clothing interpretation
2012-12-05
Analysis of firefighting clothing
2012-12-06
firefighting clothing Scope
2012-12-06
FireFighter Clothing fabrics
2012-12-07
fireproof safety common sense
2012-12-11
Types of fireproof material
2012-12-11
Personal protective clothing
2012-12-12
Janesville Fireman Turnout Gear
2012-12-13
Gear fire turnout gear
2012-12-14
Fire agile turnout gear
2012-12-18
Morning arrogant Fireman Turnout Gear
2012-12-18
firefighter clothing
2013-01-05
Civil textile development
2013-01-06
Cannabis products
2013-01-06
Sino US special protective clothing
2013-01-07
New Progress of Textile Ecology
2013-01-08
Military CDW multifunctional clothing fabric
2013-01-09
Functional fibers
2013-01-10
A metal conductive fibers can be woven
2013-01-10
Introduction of protective clothing
2013-01-11
Durability of non woven clothing fabric
2013-01-14
Civil retardant fiber market were praised
2013-01-16
Multifunction military camouflage fabric
2013-01-18
Clothing retardant performance standards Overview of infants and young children at home and abroad
2013-01-18
Heat and flame resistance of organic fiber
2013-01-21
Status of textiles retardant technology
2013-01-23
Aramid fiber textile knowledge
2013-01-25
The status of aramid fiber
2013-01-25
Clothing warp knitted spacer fabrics
2013-01-27
Silk multifunction finishing technology
2013-01-28
Superfine fiber spunbonded nonwoven fabric
2013-01-29
To defeat fiber of superbugs
2013-02-01
The protective textile vast market
2013-02-03
Pretreatment of aramid fiber 1313
2013-02-17
Inclement weather protective textiles
2013-02-19
The fabrics quality of novelty divergent
2013-02-20
Type and performance characteristics of the flame retardant coating gum coating based glue
2013-02-21
Flame retardant finishing of wool fabrics
2013-02-21
Fire blanket to use
2013-03-14
Analysis of firefighting suits
2013-03-14
Features and functions of the fire boots
2013-03-15
Characteristics of fire gloves
2013-03-15
Tendency of fire service
2013-03-17
What are the performance of the fire helmet
2013-03-18
The welding blanket of application
2013-03-18
Introduction of fire helmet
2013-03-19
The main parameters of the fire service
2013-03-20
Extinguishing blanket use
2013-03-21
FireFighter Clothing and maintenance
2013-05-03
Fire service
2013-05-10
The fire blanket Profile and use
2013-05-10
Fire-fighting equipment refers to what
2013-05-15
Precautions for use by the fire service
2013-05-22
The use of fire boots
2013-06-03
The use of fire blankets
2013-07-03
Firefighters fire service
2013-08-09
Manual fire fighting clothing
2013-08-11
Goggles applications and features
2013-08-21
Classification of PPE
2013-08-22
Common types of use of goggles
2013-08-23
Fire protective clothing characteristics
2013-08-28
Chemical protective clothing for firefighters fighting fire accidents are essential goods
2013-08-29
Fire retardant composition used clothing
2013-08-29
Chemical protective clothing for fire control and maintenance of the quality requirements of Note
2013-08-31
Helmets need to correctly select
2013-09-12
Protective gloves and protective clothing
2013-09-12
Use protective gloves that need attention
2013-09-13
The use of standard safety shoes
2013-09-14
Helmet pressure principle
2013-09-16
Proper use of personal protective equipment
2013-09-18
Equipped with personal protective equipment
2013-09-18
How safe use of protective clothing
2013-09-24
Fire protective clothing
2013-10-08
Types of fire protective clothing and use
2013-10-08
How to choose protective clothing
2013-10-10
Personal protective clothing is configured
2013-10-10
adiological protection of the right way
2013-10-17
Personal protection welding operations which
2013-10-19
The use of helmets and precautions
2013-10-22
Classification and use of protective gloves
2013-10-22
Fire blanket material
2013-10-24
Introduction fireman's outfit
2013-10-27