The current domestic and international firefighting clothing consists of four fabrics, namely, the first layer (outermost layer) for the flame retardant layer, followed by the gas-permeable layer, the insulation of the flame retardant layer and the comfort layer.
The Firefighting Clothing of the new design of the first layer of clothing for Firefighting Clothing-retardant layer fabric. Is widely used in the international quality flame retardant fiber, flame retardant fabrics and made to adapt to different needs, so as to achieve the desired flame retardant function. The second layer will be two, three, four stitched together, as one set of waterproof, breathable, thermal insulation and comfort and other features. Special selection of imported carbon fiber insulation retardant layer made of insulation flame retardant cotton in order to achieve the best results, and rejection of the original domestic Firefighting Clothing service used in the inner nylon cloth, switch to high-count cotton muslin as the basis for more kinds of treatment, so that Firefighting Clothing fighters wearing comfort, soft, close. Greatly reduce the
overall weight of the Firefighting Clothing fighting clothing.
Based on full analysis of existing Firefighting Clothing at home and abroad clothing and other special service features, combined with the body of the Firefighting Clothing fighters and the actual demand of design, prototype and production of a new type of Firefighting Clothing off the water protective clothing carried out in-depth study of the system, and more times deep Firefighting Clothing forces exchange and test, listen to the suggestions for improvement of the Firefighting Clothing officers and soldiers, embodies the humane novel style design of the Firefighting Clothing service.
Major improvements have eight
1, windproof Firefighting Clothingwall
Original Firefighting Clothing hem Chang Kai waist belt for tight, but climb the Firefighting Clothing-fighting operation, the hem will often be windblown or flames
extending from the hem to the body, soldiers underwear combustion caused skin burns, and even endanger the lives and safety of the soldiers.
Improved Firefighting Clothing disengage the inner layer and the outer layer of the hem, the hem of the inner surface of the fixed side then a windproof waterproof layer,
the bottom made the tight wide elastic structure, to build personal windproof Firefighting Clothingwall, to avoid the flames to the Firefighting Clothing fighters body within
the extension.
2, lumbar support
Firefighting Clothing actual needs of the back side of the system increases a lumbar support from a variety of materials in the original protective pants waistband, this
design can reduce the Firefighting Clothing fighters in the Firefighting Clothing operations waist injury, Firefighting Clothing fighters can rely on in near supports longer
time with high-pressure water jets to spray off the water they would not let the cold water to penetrate directly to the waist, the waist chills.
3, can identify whether to show signs of wear liner
As the Firefighting Clothing liner can be detachable, so designed at the middle of the tank dorsal hem conscious fixedly connected to a reflective tape, the lower end of the
reflective band and coat the outer surface of the hem with Velcro detachable connection, so that in with fast identification into the Firefighting Clothing before Firefighting
Clothing worn by the Firefighting Clothing fighters warm waterproof insulation liner into the Firefighting Clothing operation;
More than three design (windproof Firefighting Clothingwall, lumbar support, the display can identify signs) has been the Chinese State Intellectual Property application for
utility model patents, and the receipt of the notification of acceptance.
4, plus seam double flame retardant fabrics
Watch Firefighting Clothing fighters combat exercises, feel when in actual Firefighting Clothing fighting, Firefighting Clothing fighters, often to kneel, climb, climbing,
and other strong operating strength. Add seam design specially in the elbow and legs at the knees when the double-retardant fabric lined with cotton insulation and tarps, so
that, on the one hand can increase fastness to prevent damage, Firefighting Clothing combat soil kneeling job the knee is not easy to water seepage. It also can increase the
performance of clothing comfort, protection and avoid the Firefighting Clothing fighters during the operation to prevent the knee and elbow damage.
5 feet of the Firefighting Clothing service port and cuffs
Feet on Firefighting Clothing mouth folder and face with 3 nylon zipper foot inside the mouth flat service connection. The windproof flame retardant to play. Is not easy in
the Firefighting Clothing debris hooked, causing unexpected accidents.
Firefighting Clothing cuffs, inner layer made of waterproof fabric elastic mouth can prevent water from shed arm cuffs, mounted on the outside of the wide cuffs 5 cm wide,
15 cm long climb, and with Velcro can arbitrarily cuffs tighten or loosen, so that Firefighting Clothing fighters put out the Firefighting Clothing.
6, leg
For Firefighting Clothing fighters can easily knees squat operation, a lot of thought on the design of the trouser legs. Now knee pants after piece bend parallel contraction
into 1.5 cm, pants knees bend at the front pieces each hit two dark tuck Building sew seams and rear bumpers, this Firefighting Clothing pants, not wearing formed a great circle
arc forward asperity, the Firefighting Clothing fighting soil wearing job squat knees, will prepare a sense of comfort and convenience.
7, tool bag
Firefighting Clothing suit pants, sew two side of each installed a patch pocket and patch pocket to the bottom corner of each hit two gathers, increasing the capacity of the
patch pocket, and well-designed bag cover, place and extract easy to Firefighting Clothing fighters put out the Firefighting Clothing will preparation tools, it is not easy to
throw in the job will be tools fall.
8, shirt pocket
Determine the parts due to the the shirt chest reflective tape device, the design of the jacket pocket is more difficult to choose. Designed blazers bag, easy water coming
down in the Firefighting Clothing fighting operation.; Patch pocket as designed, will be reflective tape to disconnect reflective tape is likely to cause breakage. Therefore, in
the design, the first is still Xiyong original programs. The transverse mounted a small climb in the chest, the middle separated into wide, narrow Sec, can freely insert walkie
-talkie, lighting flashlight and other supplies.